Empty project. Only Acon EQ on the Master bus "no Input".
System microphone Disabled.
Melda DynamicEQ also detects the noise floor which is from 20 to 20000hz (Acon 20 to 5000Hz).
In order to eliminate the detection from Melad EQ I need to insert the Tool device before the EQ and lower the volume down to -36.5db
Like I mentioned, no other DAW is producing this.![:?]( "Confused")
System microphone Disabled.
Melda DynamicEQ also detects the noise floor which is from 20 to 20000hz (Acon 20 to 5000Hz).
In order to eliminate the detection from Melad EQ I need to insert the Tool device before the EQ and lower the volume down to -36.5db
Like I mentioned, no other DAW is producing this.
Statistics: Posted by liquidsound — Wed Sep 11, 2024 1:11 am